Fastpass is terug. Onze Microsoft FastPass-bundel biedt onbeperkte deelname aan Microsoft Online Instructor LED-cursussen voor 30 september 2021. Nu bekijken.

Cisco - CCNA Boot Camp - Routing and Switching (CCNAX)

Looptijd

Looptijd:

Slechts 5 dagen

Methode

Methode:

Klas / Online / Hybride

Volgende datum

Volgende datum:

28/6/2021 (Maandag)

Overview

Official Cisco CCNA course, CCNA Training and CCNA certification

This certification retired on 24th February 2020. Our closest replacement is CCNA.

On this 5-day accelerated CCNAX course you’ll learn both Interconnecting Cisco Networking Devices Parts 1 and 2 (ICND1 & ICND2).

You’ll learn to install, operate, configure and verify a basic IPv4 and IPv6 network, including:

  • Configuring a LAN switch
  • Configuring an IP router
  • Connecting to a WAN
  • Identifying basic security threats

You’ll also get familiar with more in-depth topics such as how to install, operate and troubleshoot a medium-sized network, including connecting to a WAN and implementing network security.

On this course, you’ll benefit from our unique Lecture | Lab | Review approach that combines both theoretical and practical learning. This will help accelerate your learning and ensure you have the hands-on experience necessary to apply your new found knowledge as soon as you return to work.

You’ll also get 24/7 access to practice labs, official Cisco curriculum and real Cisco networking equipment.

The CCNAX course differs from the CCNA Routing & Switching course in that it combines and shortens the ICND1 and ICND2 curriculum and requires that you only take the 200-125 CCNA examination. Achieving this will result in the CCNA Routing and Switching certification. You’ll sit this exam, covered by your Certification Guarantee, just steps from your classroom.

Zeven redenen waarom jij voor jouw CCNAX cursus voor Firebrand kiest:

  1. Jij zal in slechts 5 dagen CCNAX gecertificeerd zijn. Doordat onze cursussen residentieel zijn kunnen wij langere lesdagen aanbieden en zal je tijdens je verblijf volledig gefocust zijn op jouw cursus
  2. Onze CCNAX cursus is all-inclusive. Cursusmaterialen, accommodatie en maaltijden zijn inbegrepen.
  3. Slaag de eerste keer voor CCNAX of train gratis opnieuw.Op basis van onze certificeringsgarantie kun je voor het geval je de eerste keer niet slaagt binnen een jaar terugkomen en opnieuw trainen. Je betaalt dan alleen voor accommodatie en examens. De andere kosten zijn inbegrepen.
  4. Je zal meer over CCNAX leren. Waar opleidingen elders doorgaans van 9:00 tot 17:00 duren, kan je bij Firebrand Training rekenen op 12 uur training per dag!
  5. Je zal CCNAX sneller beheersen. Doordat onze cursussen residentieel zijn word je in korte tijd ondergedompeld in de theorie. Hierdoor zal je volledig gefocust zijn op de cursus en zal je sneller de theorie en praktijk beheersen.
  6. Je zal voor CCNAX studeren bij de beste training provider. Firebrand heeft het Q-For kwaliteitlabel, waarmee onze standaarden en professionaliteit op het gebied van training erkend worden. We hebben inmiddels 102635 professionals getraind en gecertificeerd!
  7. Je gaat meer doen dan alleen de cursusstof van CCNAX bestuderen. We maken gebruik van laboratoria, case-studies en oefentests, om ervoor te zorgen dat jij jouw nieuwe kennis direct in jouw werkomgeving kan toepassen.

Benefits

Use your Cisco Learning Credits (CLCs)

You may be entitled to free training via Cisco Learning Credits (CLCs). If you’ve bought Cisco hardware or software - check the invoice to see if you have credits waiting to be used! If you’re unsure, get in touch with us.

Curriculum

Building a Simple Network

  • Exploring the Functions of Networking
  • Understanding the Host-to-Host Communications Model
  • Introducing LANs
  • Operating Cisco IOS Software
  • Starting a Switch
  • Understanding Ethernet and Switch Operation
  • Troubleshooting Common Switch Media Issues

Establishing Internet Connectivity

  • Understanding the TCP/IP Internet Layer
  • Understanding IP Addressing and Subnets
  • Understanding the TCP/IP Transport Layer
  • Exploring the Functions of Routing
  • Configuring a Cisco Router
  • Exploring the Packet Delivery Process
  • Enabling Static Routing
  • Learnin Basics of ACL
  • Enabling Internet Connectivity

Implementing Scalabale Medium-Sized Networks

  • Implementing and Troubleshooting VLANs and Trunks
  • Building Redundant and Switched Topologies
  • Improving Redundant Switched Topologies with EtherChannel
  • Routing Between VLANs
  • Using a Cisco IOS Network Device as a DHCP Servcer
  • Understanding Layer 3 Redundancy
  • Implementing RIPv2

Introducing IPv6

  • Introducing Basic IPv6
  • Understanding IPv6 Operation
  • Configuring IPv6 Static Routes

Troubleshooting Basic Connectivity

  • Troubleshooting IPv4 Network Connectivity
  • Troubleshooting IPv6 Network Connectivity

Implementing Network Device Security

  • Securing Administrative Access
  • Implementing Device Hardening
  • Implementing Advance Security

Implementing an EIGRP-Based Solution

  • Implementing EIGRP
  • Implementing EIGRP for IPv6
  • Troubleshooting EIGRP

Implementing a Scalable OSPF-Based Solution

  • Understanding OSPF
  • Multiarea OSPF IPv4 Implementation
  • Implementing OSPFv3 for IPv6

Implementing Wide Area Networks

  • Understanding WAN Technologies
  • Understanding Point-to-Point Protocols
  • Configuring GRE Tunnels
  • Configuring Single-Homed EBGP

Network Device Management

  • Implementing Basic Network Device Management
  • Evolution of Intelligent Networks
  • Introducing QoS
  • Managing Cisco Devices
  • Licensing

Labs

  • Discovery 1: Get Started with Cisco CLI
  • Discovery 2: Perform Basic Switch Configuration
  • Discovery 3: Observe How a Switch Operates
  • Discovery 4: Troubleshoot Switch Media and Port Issues
  • Discovery 5: Inspect TCP/IP Applications
  • Discovery 6: Start with Cisco Router Configuration
  • Discovery 7: Configure Cisco Discovery Protocol
  • Discovery 8: Configure Default Gateway
  • Discovery 9: Exploration of Packet Forwarding
  • Discovery 10: Configure and Verify Static Routes
  • Discovery 11: Configure and Verify ACLs
  • Discovery 12: Configure a Provider-Assigned IP Address
  • Discovery 13: Configure Static NAT
  • Discovery 14: Configure Dynamic NAT and PAT
  • Discovery 15: Troubleshoot NAT
  • Challenge 1: Summary Challenge Lab: 1
  • Challenge 2: Summary Challenge Lab: 2
  • Discovery 16: Configure VLAN and Trunks
  • Discovery 17: Troubleshoot VLANs and Trunks
  • Discovery 18: Configure Root Bridge and Analyse STP Topology
  • Discovery 19: Troubleshoot STP Issues
  • Discovery 20: Configure and Verify EtherChannel
  • Discovery 21: Configure a Router on a Stick
  • Discovery 22: Configure a Cisco Router as a DHCP Server
  • Discovery 23: Troubleshoot DHCP Issues
  • Discovery 24: Configure and Verify HSRP
  • Discovery 25: Troubleshoot HSRP
  • Discovery 26: Configure and Verify RIPv2
  • Discovery 27: Troubleshoot RIPv2
  • Challenge 3: Implementing RIPv2
  • Discovery 28: Configure Basic IPv6 Connectivity
  • Discovery 29: Configure IPv6 Static Routes
  • Challenge 4: Implement IPv6 Static Routing
  • Discovery 30: Use Troubleshooting Tools
  • Discovery 31: Configure and Verify IPv4 Extended Access Lists
  • Discovery 32: Troubleshoot IPv4 Network Connectivity
  • Challenge 5: Troubleshooting IPv4 Connectivity
  • Discovery 33: Configure and Verify IPv6 Extended Access Lists
  • Discovery 34: Troubleshoot IPv6 Network Connectivity
  • Challenge 6: Troubleshooting IPv6 Connectivity
  • Discovery 35: Enhance Security of Initial Configuration
  • Discovery 36: Limit Remote Access Connectivity
  • Challenge 7: Securing Device Administrative Access
  • Discovery 37: Configure and Verify Port Security
  • Discovery 38: Configure and Verify NTP
  • Challenge 8: Implementing Device Hardening
  • Discovery 39: Configure External Authentication Using RADIUS and TACACS+
  • Discovery 40: Configure and Verify EIGRP
  • Discovery 41: Configure and Verify EIGRP for IPv6
  • Discovery 42: Troubleshoot EIGRP
  • Challenge 9: Troubleshooting EIGRP
  • Challenge 10: Summary Challenge Lab: 3
  • Challenge 11: Summary Challenge Lab: 4
  • Discovery 43: Configure and Verify Single-Area OSPF
  • Discovery 44: Configure and Verify Multiarea OSPF
  • Discovery 45: Configure and Verify OSPFv3
  • Discovery 46: Troubleshoot Multiarea OSPF
  • Challenge 12: Troubleshooting OSPF
  • Discovery 47: Configure Serial Interface and PPP
  • Discovery 48: Configure and Verify MLP
  • Discovery 49: Configure and Verify PPPoE Client
  • Discovery 50: Configure and Verify GRE Tunnel
  • Discovery 51: Configure and Verify Single Homed EBGP
  • Challenge 13: Implementing Single-Homed EBGP
  • Discovery 52: Configure Syslog
  • Discovery 53: Configure SNMP
  • Challenge 14: Summary Challenge Lab: 5
  • Challenge 15: Summary Challenge Lab: 6

Exam Track

You’ll sit the following exam at the Firebrand Training Centre, covered by your Certification Guarantee:

  • Exam: 200-125 CCNA

What's Included

During this course you’ll have access to:

  • Interconnecting Cisco Networking Devices; Accelerated (CCNAX) 3.0

Prerequisites

Before taking this course, you should have intermediate knowledge of networking and must meet at least one of the following requirements:

  • Attended and successfully completed the ICND1 course or CompTIA Network+ course, in the last 6 months.
  • At least 1 years' experience in installing or configuring both Cisco Routers & Switches.

This course is also suitable for you if:

  • You've held the CCNA certification in the past but it has expired.
  • Your CCNA certification is about to expire and you'd like to renew your certification.

Weet je niet zeker of je aan de vereisten voldoet? Maak je geen zorgen. Jouw trainingsadviseur bespreekt jouw achtergrond met je om te begrijpen of deze cursus geschikt is voor je.

Beoordelingen

Wereldwijd heeft Firebrand in haar 10-jarig bestaan al 102635 studenten opgeleid! We hebben ze allemaal gevraagd onze versnelde opleidingen te evalueren. De laatste keer dat we onze resultaten analyseerden, bleek 96.68% ons te beoordelen als 'boven verwachting'


"This is my second Cisco course with Firebrand NL in Ruwenberg and both times the Teachers are well prepared, helpful and very knowledgeable. Also the other Firebrand staff is very helpful and professional. "
no. (14/12/2019 (Zaterdag) t/m 21/12/2019 (Zaterdag))

"During the 7 days training there are a lot of information to learn and remember that requires a real concentration during the days and also work at night in the room. So, it is a challenge. So this represents a real challenge and also the satisfaction of having done it one day in his life."
MANENTE Bertrand, NPS Consult. (29/4/2019 (Maandag) t/m 5/5/2019 (Zondag))

"Werkelijk een eer om een week te mogen doorbrengen met een disco guru van het beste soort."
Patrick Bogers, Biqh. (1/10/2018 (Maandag) t/m 7/10/2018 (Zondag))

"Recommended it to any IT engineer, who wants to quickly get better at their work. "
Nico Verver. (29/6/2018 (Vrijdag) t/m 1/7/2018 (Zondag))

"It's a challenge; it will be hard. Wake up eat train sleep repeat and go home with those certificates. "
Kim Coussement. (5/3/2018 (Maandag) t/m 11/3/2018 (Zondag))

Cursusdata

Start datum

Eind datum

Status

Locatie

Nu boeken

22/2/2021 (Maandag)

26/2/2021 (Vrijdag)

Beëindigde cursus - Geef feedback

-

 

28/6/2021 (Maandag)

2/7/2021 (Vrijdag)

Wachtlijst

Landelijk

 

9/8/2021 (Maandag)

13/8/2021 (Vrijdag)

Beperkte beschikbaarheid

Landelijk

 

20/9/2021 (Maandag)

24/9/2021 (Vrijdag)

Open

Landelijk

 

1/11/2021 (Maandag)

5/11/2021 (Vrijdag)

Open

Landelijk

 

13/12/2021 (Maandag)

17/12/2021 (Vrijdag)

Open

Landelijk

 

Nieuwste beoordelingen van onze studenten