Cisco - CCIP

Du lär dig

Vårt accelererade Cisco CCI kurs- och certifieringsprogram erbjuder det snabbaste och mest kostnadseffektiva sättet att uppnå önskad kunskap och certifiering.

Firebrand Training är officiell Cisco Specialized Learning Partner. Det innebär att du blir utbildad av auktoriserade Cisco instruktörer, att vi använder Cisco´s officiella kursmaterial och att din utbildning är kvalitetssäkrad.

Vi har designat vårt kursmaterial så att det förbereder dig för 4 examen som du genomför på plats under kursen.

Du kommer att lära dig:

BCSI

• EIGRP routing protocol: understanding how EIGRP operates; configuring EIGRP for large networks; and verifying and troubleshooting EIGRP
• OSPF routing protocol: understanding how OSPF operates using multiple areas; configuring OSPF in a multi-area environment; and verifying and troubleshooting OSPF
• IS-IS routing protocol: understanding how IS-IS operates; configuring IS-IS; and verifying and troubleshooting IS-IS
• Routing between interior gateway protocols (IGPs): redistributing and filtering routes between IGPs
• BGP routing protocol: understanding how BGP operates for a small network; configuring BGP and controlling path selection; and verifying and troubleshooting BGP (this course only introduces BGP, while the BGP portion of the course fully explores BGP)
• IP Multicasts: understanding the use of multicasts and the IGMP discovery protocol; and configuring and verifying multicast routing using PIM
• IPv6: understanding IPv6 addressing; understanding how IPv6 and IPv4 can interoperate; and configuring and verifying OSPF routing using IPv6

BGP

• BGP overview: understanding BGP’s use and limitations, the concept of BGP neighbors and peering relationships, inter-domain routing and how BGP routes are propagated; and understanding how a BGP router selects paths to destinations
• Basic BGP configuration: configuring, verifying, and troubleshooting basic BGP routing between multiple autonomous systems (AS)
• BGP route selection and policy controls: understanding the need for influencing BGP route selection and configuring route selection using AS path filters, prefix list filters, and route maps; using route filtering to reduce the impact of BGP processing on a router; and configuring the route-refresh feature to reduce the impact of speeding up BGP routing updates
• BGP route selection and attributes: understanding the BGP path attributes and their influence on choosing routes and configuring the weight, local preference, multi-exit discriminator (MED), community attributes to influence route selection of BGP paths
• BGP connections between customers and ISPs: understanding the requirements for customer/ISP connections; using static routing for customer/ISP connections, and using BGP to create multiple BGP peering relationships to the same or different ISPs (multi-homing)
• BGP transit routing: understanding external BGP (EBGP) and internal BGP (IBGP) interactions and attributes that affect it; understanding how an IGP is used to forward packets through an AS; and configuring, monitoring, and troubleshooting an AS acting as a transit backbone
• BGP route reflectors: understanding the function and operating of route reflectors; using route reflectors in a hierarchical design; and configuring, monitoring, and troubleshooting a route reflector configuration
• Advanced BGP configuration tasks: limiting the number of prefixes (routes) accepted from a BGP neighbor; pre-pending AS path values to influence path selection through multiple neighboring autonomous systems; creating BGP peer groups to share common parameters; and implementing route flap dampening to minimize the impact of route changes on BGP processing on routers
• BGP scalability for ISPs: understanding concerns for an ISP network; implementing OSPF or IS-IS for IGP connectivity; and understanding scalability issues ISPs will experience when using BGP and common solutions to deal with these issues

QOS

• Quality of service (QoS) overview: understanding issues that can create problems for networks with mixed traffic types and understanding available solutions and their implementations
• QoS components: understanding the QoS models available, including DiffServer; understanding DSCP and how it interoperates with IP-precedence-based devices; and understanding common mechanisms used for implementing QoS
• Modular QoS CLI (MQC) and Auto-QoS: implementing QoS policies using MQC and understanding how Auto-QoS is used and its implementation
• Classification and Marking: understanding how data link and network layer packet markings are used to define service classes for different applications; understanding how to classify packets correctly using MQC; understanding how to use class-based marking to assign traffic to a service class; understanding Cisco’s network-based application recognition (NBAR) feature; understanding why pre-classifying traffic in a VPN-based network is important; understanding how QoS trust boundaries can impact the classification and marking of traffic; and defining the different classification and marking options supported by Cisco IOS layer 2 and layer 3 devices
• Congestion management methods: comparing and contrasting the different queuing algorithms; understanding the hardware and software queuing solutions (WFQ, CBWFQ, and LLQ) on Cisco routers and how they can be affected by congestion and tuning; configuring queuing solutions on Cisco routers; and comparing queuing solutions on Cisco routers to the Catalyst 2950 switches
• Congestion avoidance methods: understanding the issues of tail dropping as a congestion control mechanism; understanding the elements of RED traffic profiling and how weighted random early detection (WRED) can be used to prevent congestion; understanding how ECN interacts with WRED on Cisco devices; and configuring and monitoring DSCP-based CB-WRED
• Traffic policing and shaping: understanding how traffic condition uses traffic policing and shaping and their differences; understanding how devices measure traffic rates using single- or dual-rate token bucket models; configuring and monitoring single- and dual-rate CB-policing, understanding how average and peak rate can be used to rate limit traffic; and configuring and monitoring CB-shaping and adaptive CB-shaping in Frame Relay
• Link-efficiency mechanisms: comparing and contrasting link efficiency mechanisms; configuring and monitoring CB header compression; determining proper fragment sizes based on link speed and traffic delay requirements; configuring and monitoring multilink PPP with interleaving and FRF.12 on Cisco routers.
• QoS best practices: understanding the QoS requirements for many different applications; understanding the delay, jitter, bandwidth, and packet loss requirements for various types of traffic; and knowing the best practices for QoS solutions in LAN and WAN environments

MPLS

• MPLS overview: understanding the technology and concepts of MPLS, including labels and label stacking, as well as identifying MPLS-based applications
• MPLS operation: understanding the concepts and behaviors in MPLS networks of Label Distribution in Frame-mode, LC-ATM interfaces, and VC merge; understanding MPLS label allocation, distribution, and retention modes; and understanding the LDP neighbor discovery process
• Frame-Mode and Cell-Mode MPLS implementations: understanding CEF switching; configuring and monitoring frame-mode MPLS on Cisco devices; configuring and monitoring, label-controlled ATM MPLS; and configuring and monitoring LC-ATM MPLS over ATM virtual paths
• MPLS and VPNs: understanding an overview of VPN technologies; using overlay with peer-to-peer VPNs; understanding the MPLS VPN categorization, architecture, and routing models; being familiar with the MPLS VPN features of Cisco devices; configuring and monitoring MPLS VPNs on Cisco devices using VRF tables, MP-BGP sessions, small scale routing protocols; using the VRF import and export features; understanding overlapping VPNs, central service VPNs, and managed CE router services; and understanding internet access from a VPN, including Internet access topologies and implementation methods

Sju anledningar till varför du bör välja din kurs med Firebrand Training

1. Två utbildningsalternativ. Välj mellan boende på plats med klassrumsundervisning eller onlinekurser
2. Du blir certifierad snabbt. Hos oss blir du utbildad rekordsnabbt
3. Vår kurs är heltäckande. En engångsavgift täcker alla kursmaterial, examina**, boende* och måltider*. Inga dolda extra kostnader.
4. Godkänn första gången eller träna om gratis. Detta är vår garanti. Vi är övertygade om att du kommer klara kursen på första försöket. Men om inte, kom tillbaka inom ett år och betala endast för boende, examina och tillkommande kostnader
5. Du kommer lära dig mer. En dag med en traditionell utbildningsleverantör brukar generellt pågå från kl. 9 till 17, med en lång paus för lunch. Med Firebrand Training får du minst 12 timmar/dag av kvalitativ inlärningstid med din instruktör
6. Du kommer lära dig snabbare. Sannolikheten är att du har en annan inlärningsstil än de omkring dig. Vi kombinerar visuella, auditiva och taktila stilar för att leverera materialet på ett sätt som säkerställer att du lär dig snabbare och enklare
7. Du kommer studera med de bästa. Vi har varit med på Training Industrys lista "Top 20 IT Training Companies of the Year" varje år sedan 2010. Förutom många fler utmärkelser har vi utbildat och certifierat över 100 000 yrkesverksamma