Retired courses - Certified Specialist - Enterprise Advanced Infrastructure Implementation | 300-410 ENARSI

On this accelerated Cisco Certified Specialist – Enterprise Advanced Infrastructure Implementation course, you’ll gain the knowledge and skill-set to install, configure, operate and troubleshoot an enterprise network.

In just 4 days, you'll learn how to implement and troubleshoot advanced routing technologies and services. You'll also learn how to:

• Optimise classic Enhanced Interior Gateway Routing Protocol (EIGRP)
• Optimise MP-BGP for IPv4 and IPv6
• Implement Cisco Internetwork Operating System (IOS) Dynamic Multipoint VPNs (DMVPNs)

At the end of the course, you’ll sit exam 300-410 ENARSI: Implementing Cisco Enterprise Advanced Routing and Services v1.0 and achieve the Cisco Certified Specialist – Enterprise Advanced Infrastructure Implementation certification.

You’ll get access to official courseware and learn from certified Cisco instructors, as Firebrand is a Cisco Learning Partner. Train through Firebrand’s Lecture | Lab | Review methodology and you’ll pass your exam at twice the speed.

Audience

This course is ideal for:

• Enterprise network engineers
• System engineers
• System administrators
• Network administrators

Next step: CCNP Enterprise

Once you have passed exam 300-410 ENARSI, you’ll be halfway towards achieving the CCNP Enterprise certification. Next, achieve the Cisco Certified Specialist - Enterprise Core certification and get your CCNP Enterprise.

• Module 1: Implementing EIGRP
• Module 2: Optimising EIGRP
• Module 3: Troubleshooting EIGRP
• Module 4: Implementing OSPF
• Module 5: Optimising OSPF
• Module 6: Troubleshooting OSPF
• Module 7: Implementing Internal Border Gateway Protocol (IBGP)
• Module 8: Optimising BGP
• Module 9: Implementing MP-BGP
• Module 10: Troubleshooting BGP
• Module 11: Configuring Redistribution
• Module 12: Troubleshooting Redistribution
• Module 13: Implementing Path Control
• Module 14: Exploring MPLS
• Module 15: Introducing MPLS L3 VPN Architecture
• Module 16: Introducing MPLS L3 VPN Routing
• Module 17: Configuring Virtual Routing and Forwarding (VRF)-Lite
• Module 18: Implementing DMVPN
• Module 19: Implementing DHCP
• Module 20: Troubleshooting DHCP
• Module 21: Introducing IPv6 First Hop Security
• Module 22: Securing Cisco Routers
• Module 23: Troubleshooting Infrastructure Security and Services

Lab Outline

• Module 1: Configure EIGRP Using Classic Mode and Named Mode for IPv4 and IPv6
• Module 2: Verify the EIGRP Topology Table
• Module 3: Configure EIGRP Stub Routing, Summarisation, and Default Routing
• Module 4: Configure EIGRP Load Balancing and Authentication
• Module 5: LAB: Troubleshoot EIGRP Issues
• Module 6: Configure OSPFv3 for IPv4 and IPv6
• Module 7: Verify the Link-State Database
• Module 8: Configure OSPF Stub Areas and Summarisation
• Module 9: Configure OSPF Authentication
• Module 10: Troubleshoot OSPF
• Module 11: Implement Routing Protocol Redistribution
• Module 12: Manipulate Redistribution
• Module 13: Manipulate Redistribution Using Route Maps
• Module 14: Troubleshoot Redistribution Issues
• Module 15: Implement PBR
• Module 16: Configure IBGP and External Border Gateway Protocol (EBGP)
• Module 17: Implement BGP Path Selection
• Module 18: Configure BGP Advanced Features
• Module 19: Configure BGP Route Reflectors
• Module 20: Configure MP-BGP for IPv4 and IPv6
• Module 21: Troubleshoot BGP Issues
• Module 22: Implement PBR
• Module 23: Configure Routing with VRF-Lite
• Module 24: Implement Cisco IOS DMVPN
• Module 25: Obtain IPv6 Addresses Dynamically
• Module 26: Troubleshoot DHCPv4 and DHCPv6 Issues
• Module 27: Troubleshoot IPv4 and IPv6 Access Control List (ACL) Issues
• Module 28: Configure and Verify Control Plane Policing
• Module 29: Configure and Verify Unicast Reverse Path Forwarding (uRPF)
• Module 30: Troubleshoot Network Management Protocol Issues: Lab 1
• Module 31: Troubleshoot Network Management Protocol Issues: Lab 2

As part of your accelerated course, you’ll sit the following exam at the Firebrand Training centre, covered by your Certification Guarantee:

Implementing Cisco Enterprise Advanced Routing and Services (300-410 ENARSI)

• Exam code: 300-410 ENARSI
• Duration: 90 minutes
• Language: English
• Domains:
1. Layer 3 Technologies (35%)
2. VPN Technologies (20%)
3. Infrastructure Security (20%)
4. Infrastructure Services (25%)

These domains are general guidelines for the content likely to be included in the exam. As Cisco continues to develop this certification, other related topics may also appear.

Before taking this accelerated course, you should have an understanding of:

• Network fundamentals
• How to manage and secure network devices
• Network automation and
• How to implement LANs

Alternatively, any of the following courses and exams would fill the prerequisite:

• Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR) v1.0
• Interconnecting Cisco Networking Devices, Part 1 (ICND1) v3.0
• Interconnecting Cisco Networking Devices, Part 2 (ICND2) v3.0

Your accelerated course includes:

• Accommodation *
• Meals, unlimited snacks, beverages, tea and coffee *
• On-site exams **
• Exam vouchers **
• Practice tests **
• Certification Guarantee ***
• Courseware
• Up-to 12 hours of instructor-led training each day
• 24-hour lab access
• Digital courseware **

* For residential training only. Accommodation is included from the night before the course starts. This doesn't apply for online courses.
** Some exceptions apply. Please refer to the Exam Track or speak with our experts.
*** Pass first time or train again free as many times as it takes, unlimited for 1 year. Just pay for accommodation, exams, and incidental costs.

Seven reasons why you should sit your course with Firebrand Training

1. Two options of training. Choose between residential classroom-based, or online courses
2. You'll be certified fast. With us, you’ll be trained in record time
3. Our course is all-inclusive. A one-off fee covers all course materials, exams**, accommodation* and meals*. No hidden extras.
4. Pass the first time or train again for free. This is our guarantee. We’re confident you’ll pass your course the first time. But if not, come back within a year and only pay for accommodation, exams and incidental costs
5. You’ll learn more. A day with a traditional training provider generally runs from 9 am – 5 pm, with a nice long break for lunch. With Firebrand Training you’ll get at least 12 hours/day of quality learning time, with your instructor
6. You’ll learn faster. Chances are, you’ll have a different learning style to those around you. We combine visual, auditory and tactile styles to deliver the material in a way that ensures you will learn faster and more easily
7. You’ll be studying with the best. We’ve been named in the Training Industry’s “Top 20 IT Training Companies of the Year” every year since 2010. As well as winning many more awards, we’ve trained and certified over 135,000 professionals

• For residential training only. Doesn't apply for online courses
  ** Some exceptions apply. Please refer to the Exam Track or speak with our experts

Think you are ready for the course? Take a FREE practice test to assess your knowledge!  Free Practice Test