Looking for Global training? Go to https://firebrand.training/en or stay on the current site (Nederland)
Part of the BPP Education Group
024-8457770
Cisco - Implementing & Operating Cisco Enterprise Network Core Technologies certification
Overview
The Cisco Certified Specialist - Enterprise Core certification is offered as 5 days in-classroom modules, and a required 3 days self-study modules. Train with Firebrand, and you'll cover all modules over a total of just 6 days, including sitting Exam 350-401 ENCOR. Get certified with Firebrand at 33% faster than traditional training.
Get the skills and knowledge you need to implement core enterprise network technologies within your business on this accelerated Cisco Certified Specialist - Enterprise Core course.
In just 6 days, you'll learn how to implement virtualisation, network assurance and automation into your business. You'll also discover core enterprise network technologies like dual stack (IPv4 and IPv6) architecture.
During your accelerated course, you'll study:
- Working principles of the Cisco SD-Access solution
- Configuration and verification of data path virtualisation technologies
- Interpretation of REST API response codes and results in payload using Cisco DNA Centre and RESTCONF
You'll get access to official courseware and learn from certified Cisco instructors, as Firebrand is a Cisco Learning Partner. At the end of the course, you'll sit exam 350-401 ENCOR: Implementing and Operating Cisco Enterprise Network Core Technologies v1.0 and achieve the Cisco Certified Specialist - Enterprise Core certification.
Start your Cisco journey in a distraction-free environment and learn at twice the speed through Firebrand's Lecture | Lab | Review methodology.
Your next steps to CCNP or CCIE certifications
Once you have passed the 350-401 ENCOR exam, you'll be ready to sit any of the following Cisco concentration exams:
- 300-410 ENARSI: Implementing Cisco Enterprise Advanced Routing Services (ENARSI)
- 300-415 ENSDWI: Implementing Cisco SD-WAN Solutions (SDWAN300)
- 300-420 ENDSLD: Designing Cisco Enterprise Network (ENSLD)
- 300-425 ENWLSD: Designing Cisco Enterprise Wireless Networks (ENWLSD)
- 300-430 ENWLSI: Implementing Cisco Enterprise Wireless Networks (ENWLSI)
- 300-435 ENAUTO: Implementing Automation for Cisco Enterprise Solutions (ENAUI)
Pass any of these exams and you'll achieve your CCNP Enterprise certification.
Or, if you're aiming for the CCIE Enterprise Infrastructure and CCIE Enterprise Wireless certifications, you'll just need to complete the appropriate lab:
- CCIE Enterprise Infrastructure (CIE Enterprise Infrastructure v1.0 lab)
- CCIE Enterprise Wireless (CCIE Enterprise Wireless v1.0 lab)
Benefits
Gebruik uw Cisco Learning Credits (CLCs)
Met uw opgebouwde CLC’s heeft u wellicht recht op gratis trainingen. Kijk als u Cisco hard- of software gekocht hebt op uw factuur of u ongebruikte credits hebt. Indien u twijfelt, neem gerust contact met ons op.
Other accelerated training providers rely heavily on lecture and independent self-testing and study.
Effective technical instruction must be highly varied and interactive to keep attention levels high, promote camaraderie and teamwork between the students and instructor, and solidify knowledge through hands-on learning.
Firebrand Training provides instruction to meet every learning need:
- Intensive group instruction
- One-on-one instruction attention
- Hands-on labs
- Lab partner and group exercises
- Question and answer drills
- Independent study
Curriculum
Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR) v1.0
- Module 1: Examining Cisco Enterprise Network Architecture
- Module 2: Understanding Cisco Switching Paths
- Module 3: Implementing Campus LAN Connectivity
- Module 4: Building Redundant Switched Topology
- Module 5: Implementing Layer 2 Port Aggregation
- Module 6: Understanding EIGRP
- Module 7: Implementing OSPF
- Module 8: Optimising OSPF
- Module 9: Exploring EBGP
- Module 10: Implementing Network Redundancy
- Module 11: Implementing NAT
- Module 12: Introducing Virtualisation Protocols and Techniques
- Module 13: Understanding Virtual Private Networks and Interfaces
- Module 14: Understanding Wireless Principles
- Module 15: Examining Wireless Deployment Options
- Module 16: Understanding Wireless Roaming and Location Services
- Module 17: Examining Wireless AP Operation
- Module 18: Understanding Wireless Client Authentication
- Module 19: Troubleshooting Wireless Client Connectivity
- Module 20: Introducing Multicast Protocols
- Module 21: Introducing QoS
- Module 22: Implementing Network Services
- Module 23: Using Network Analysis Tools
- Module 24: Implementing Infrastructure Security
- Module 25: Implementing Secure Access Control
- Module 26: Understanding Enterprise Network Security Architecture
- Module 27: Exploring Automation and Assurance Using Cisco DNA Center
- Module 28: Examining the Cisco SD-Access Solution
- Module 29: Understanding the Working Principles of the Cisco SD-WAN Solution
- Module 30: Understanding the Basics of Python Programming
- Module 31: Introducing Network Programmability Protocols
- Module 32: Introducing APIs in Cisco DNA Center and vManage
Lab outline
- Module 1: Investigate the CAM
- Module 2: Analyse Cisco Express Forwarding
- Module 3: Troubleshoot VLAN and Trunk Issues
- Module 4: Tuning Spanning Tree Protocol (STP) and Configuring Rapid Spanning Tree Protocol (RSTP)
- Module 5: Configure Multiple Spanning Tree Protocol
- Module 6: Troubleshoot EtherChannel
- Module 7: Implement Multi-area OSPF
- Module 8: Implement OSPF Tuning
- Module 9: Apply OSPF Optimisation
- Module 10: Implement OSPFv3
- Module 11: Configure and Verify Single-Homed EBGP
- Module 12: Implementing Hot Standby Routing Protocol (HSRP)
- Module 13: Configure Virtual Router Redundancy Protocol (VRRP)
- Module 14: Implement NAT
- Module 15: Configure and Verify Virtual Routing and Forwarding (VRF)
- Module 16: Configure and Verify a Generic Routing Encapsulation (GRE) Tunnel
- Module 17: Configure Static Virtual Tunnel Interface (VTI) Point-to-Point Tunnels
- Module 18: Configure Wireless Client Authentication in a Centralised Deployment
- Module 19: Troubleshoot Wireless Client Connectivity Issues
- Module 20: Configure Syslog
- Module 21: Configure and Verify Flexible NetFlow
- Module 22: Configuring Cisco IOS Embedded Event Manager (EEM)
- Module 23: Troubleshoot Connectivity and Analyse Traffic with Ping, Traceroute, and Debug
- Module 24: Configure and Verify Cisco IP SLAs
- Module 25: Configure Standard and Extended ACLs
- Module 26: Configure Control Plane Policing
- Module 27: Implement Local and Server-Based AAA
- Module 28: Writing and Troubleshooting Python Scripts
- Module 29: Explore JavaScript Object Notation (JSON) Objects and Scripts in Python
- Module 30: Use NETCONF Via SSH
- Module 31: Use RESTCONF with Cisco IOS XE Software
Exam Track
As part of your accelerated course, you'll sit the following at the Firebrand Training centre, covered by your Certification Guarantee:
Implementing Cisco Enterprise Network Core Technologies v1.0
- Exam code: 350-401 ENCOR
- Duration: 120 minutes
- Domains:
- Architecture (15%)
- Virtualisation (10%)
- Infrastructure (30%)
- Network Assurance (10%)
- Security (20%)
- Automation (15%)
These domains are general guidelines for the content likely to be included in the exam. As Cisco continues to develop this certification, other related topics may also appear.
What's Included
Your accelerated course includes:
- Accommodation *
- Meals, unlimited snacks, beverages, tea and coffee *
- On-site exams **
- Exam vouchers **
- Practice tests **
- Certification Guarantee ***
- Courseware
- Up-to 12 hours of instructor-led training each day
- 24-hour lab access
- Digital courseware **
- * For residential training only. Accommodation is included from the night before the course starts. This doesn't apply for online courses.
- ** Some exceptions apply. Please refer to the Exam Track or speak with our experts
- *** Pass first time or train again free as many times as it takes, unlimited for 1 year. Just pay for accommodation, exams, and incidental costs.
Prerequisites
Before attending this accelerated course, you should have knowledge and skills in:
- Implementing Enterprise LAN networks
- Enterprise routing and wireless connectivity
- Python scripting
Unsure whether you meet the prerequisites? Don’t worry. Your training consultant will discuss your background with you to understand if this course is right for you.
Reviews
Here's the Firebrand Training review section. Since 2001 we've trained exactly 134561 students and asked them all to review our Accelerated Learning. Currently, 96.41% have said Firebrand exceeded their expectations.
Read reviews from recent accelerated courses below or visit Firebrand Stories for written and video interviews from our alumni.
"Our course was great and I am well pleased with the experience; it was my first with Firebrand. The instructor was highly knowledgeable and was able to answer all material presented and any questions that were raised. The course was a lot of material to cover and it's best if you come into the course with extensive self study beforehand."
JH. (26/6/2023 (Monday) to 1/7/2023 (Saturday))
"Excellent training session."
JD, Gloucestershire NHS Trust. (26/6/2023 (Monday) to 1/7/2023 (Saturday))
"The site is fully open and is a relaxing place to study with no distractions. Instructors are very friendly and there is no presure on you to do any exams straight away, but they will support you in every way if you wish too."
Martin Walsh. (22/6/2020 (Monday) to 27/6/2020 (Saturday))
"An extremely good course and very well run but Important to note that you need to be well versed in the subject matter before attending to greatly improve the chance of passing the exam."
Chris Morgan, University of East Anglia. (25/9/2023 (Monday) to 30/9/2023 (Saturday))
"Good training experience in the Netherlands."
Anonymous. (28/10/2018 (Sunday) to 2/11/2018 (Friday))
Course Dates
Start |
Finish |
Status |
Book now |
|---|---|---|---|
|
11/3/2024 (Monday) |
16/3/2024 (Saturday) |
Finished - Leave feedback |
|
|
17/6/2024 (Monday) |
22/6/2024 (Saturday) |
Open |
|
|
14/10/2024 (Monday) |
19/10/2024 (Saturday) |
Open |