Bespaar met de aankoop van twee trainingen tot 31 juli 2021, 50% op de prijs van de tweede training. Bekijk hier de algemene voorwaarden!

HP - Accredited Technical Associate (ATA) - Networks

Looptijd

Looptijd:

Slechts 4 dagen

Methode

Methode:

Klas / Online / Hybride

Volgende datum

Volgende datum:

27/9/2021 (Maandag)

Overview

Learn how to design a wired and wireless switched and routed network that meets your customer's requirements. Get your HP Accredited Technical Associate – Networks certification 20% faster than traditional training.

On this course you'll learn how to explain and recognise networking technologies such as:

  • Data Link Protocols
  • Physical Connections
  • Layer 3 Routing
  • Upper Layer Protocols and Applications
  • Multicast Technology

You'll also learn how to install, configure, initiate, and upgrade networks. In addition to troubleshooting those infrastructures, you will perform administrative, operational, and network management. To ensure that you make the most of your certification, you will also learn the implications of these technologies for customer needs.

Zeven redenen waarom u met uw ATA Networks cursus voor Firebrand Training moet kiezen

  1. U zult in slechts 4 dagen ATA Networks gecertificeerd zijn. Met ons bent u in recordtijd ATA Networks getraind
  2. Onze ATA Networks cursus is all-inclusive. Een eenmalige contributie bekostigt alle cursusmaterialen, accommodaties en maaltijden.
  3. Slaag de eerste keer voor ATA Networks of volg de training nogmaals. Dit is onze garantie. Wij zijn er zeker van dat u de eerste keer zult slagen voor uw ATA Networks cursus. Mocht dit niet het geval zijn, dan kunt u binnen het jaar terugkomen en enkel voor de accommodatie en examens te betalen. De rest is gratis
  4. U zult meer ATA Networks leren. Een dag met een traditionele training aanbieder duurt over het algemeen van 9 uur 's ochtends tot 17 uur in de middag, met een lange lunchpauze. Met Firebrand Training kunt u rekenen op minstens 12 uur leren per dag met uw instructeur
  5. U zult ATA Networks snellerde theorie beheersen. De kans bestaat dat u een andere manier van leren heeft dan uw omgeving. Wij combineren visuele, auditieve en tastbare leerstijlen, dit zorgt voor een snellere en eenvoudigere manier van leren
  6. U zult ATA Networks studeren met de beste. We hebben het Q-For kwaliteit label, dat onze standaarden en professionaliteit in de training markt erkent. Naast het winnen van nog vele andere prijzen, hebben we inmiddels 105153 professionals getraind en gecertificeerd en we zijn partners met alle grote namen in deze tak van het bedrijfsleven
  7. U zult meer doen dan alleen ATA Networks de cursusstof bestuderen. We maken gebruik van laboratoria, case-studies en oefentests, om ervoor te zorgen dat u uw nieuwe kennis in uw werkomgeving kan toepassen. Onze instructeurs gebruiken demonstraties en hun eigen ervaringen om de dag interessant en boeiend te houden

Benefits

Curriculum

1. Explain and recognize networking technologies and their implications for customer needs

1.1 Describe the OSI model

  • Identify each layer and describe its purpose and function
  • Map the most common IP suite protocols to the OSI layers

1.2 Describe and recognize the most common data link protocols and their associated physical connections (layers 1 and 2)

  • Recognize and describe the common network topologies
  • Describe the most common layer media (layer 1)
  • Describe the common data link (layer 2) connections
  • Describe Ethernet technology and media
  • Describe wireless technology and media

1.3 Describe layer 3 routing concepts with detailed focus on IP

  • Compare/Contrast classful subnets vs. classless networks
  • Explain IP addressing rules
  • Describe Dynamic Host Control Protocol (DHCP)
  • Explain why IPv6 was invented (to support larger number of device addresses)
  • Describe how IPv4 routing works

1.4 Identify common dynamic routing protocols and describe their function on a network

  • Compare and contrast with static routes
  • Describe Routing Information Protocol (RIP)
  • Describe Open Shortest Path First (OSPF) and why it exists

1.5 Describe the purpose and function of layer 4 (transport) protocols on an IP network

  • Compare and contrast TCP and UDP within the IP protocol stack

1.6 Describe the common IP-based upper layer (layers 5, 6, and 7) protocols and applications

  • Identify and describe the purpose of a port
  • Identify the common upper-layer applications and their functions

1.7 Describe multicast technology and its purpose

  • Describe how a switch deals with multicast traffic differently
  • Identify common applications and protocols that use multicast on a network

1.8 Describe the concept of quality of service (QoS)

  • Describe the common use cases for QoS
  • Apply the fundamental axiom of prioritization: “If there is no congestion, prioritization has no effect”
  • Describe the difference between “over-provisioning” and prioritization and when to use one vs. the other in a small business context

1.9 Describe how to secure a network using basic security features

  • Define basic security concepts
  • Describe common network access security methods
  • Identify and describe common administrative access security methods (e.g., for infrastructure devices)
  • Describe the concepts and functions of virtual private networks (VPNs)
  • Describe the purpose and functions of firewalls and proxy servers at a high level
  • Describe the common data integrity technologies (encryption, certificates, etc.)

1.10 Describe the common ways to increase availability and performance of a network

  • Describe the concept of redundancy
  • Describe the concept of link aggregation

1.11 Describe the concept and use of VLANs

  • Describe a VLAN and its benefits
  • Describe port-based VLANs (IEEE 802.1Q)

1.12 Describe the common network management technologies

  • Describe device management
  • List and describe the common tools used to manage traffic on a network

2. Plan and design wired and wireless network solutions for SMB customers

2.1 Consult with an SMB customer to assess their business and technical needs and create a plan for a networking solution

  • Gather/Analyze customer business requirements
  • Plan for cable and port requirements
  • Plan for bandwidth and QoS requirements (Including types of traffic, iSCSI, etc.)
  • Plan for critical and high traffic users/servers
  • Plan for anticipated future growth of network
  • Plan for serviceability and management
  • Plan for mobility and wireless
  • Plan for security
  • Plan for voice
  • Plan for green IT

2.2 Design a networking solution to meet the customer needs identified in the planning stage

  • Specify number of ports and types
  • Determine speed requirements, including access speed, uplink speed, and backplane speeds
  • Design network topology
  • Determine types of media
  • Determine number uplinks required
  • Determine redundancy scheme, including spanning tree topology, layer 3 routing protocols, and link aggregation (when multiple links per host are required)
  • Assess business requirements and design all elements of network security into a single, integrated security solution
  • Specify network management tools to be used
  • Design wireless and mobility

2.3 Identify and describe best practices for designing solutions

  • Take advantage of industry standards and HP developed best practices
  • Take into consideration HP Networking strengths in the design
  • Sflow and traffic monitoring

3. Install, configure, start up, and upgrade network solutions for SMB customers

3.1 Prepare for and install networking equipment

  • Perform pre-project survey to validate appropriate design
  • Install modules and components in devices in specified slots based on manufacturer and design requirements
  • Build initial configuration files as required by design
  • Update firmware and initial configuration files
  • Perform specific configuration of devices—device name, port names, VLANs, routing, certificates, spanning tree, SSIDs, PoE, DHCP servers and relays, etc.
  • Configure WAN devices
  • Implement required security devices
  • Physically connect devices per design requirements

3.2 Install and configure management and administration solution

  • Install management software (PMC+)
  • Configure management software per design requirements (application security)
  • Run device discovery for specified devices
  • Run and store default reports, including discovered devices, network map, etc.
  • Develop and implement management policies per design requirements

3.3 Validate installed solution

  • Validate installed solution
  • Validate required devices show in management software
  • Validate wireless coverage, roaming, and capacity results compared to design
  • Validate management policy results
  • Perform backup of initial configuration (management solution and device configurations)

4. Optimize wireless, switched, and routed network infrastructures for SMB customers

4.1 Manage network assets using HP and third-party tools

  • Interpret counters and logs
  • Use HP tools to ease deployment of multiple devices
  • Interpret output of or data within existing HP tools

4.2 Optimize network performance by improving segmentation and topology

  • Small-scale capacity planning—thinking ahead, planning for expansion and future growth
  • Verify identified bottleneck or limitation

4.3 Optimize L3 routing protocol convergence and scalability

  • Tune advanced layer 3 routing protocols, including dynamic and static

4.4 Optimize network availability

  • Implement trunking

4.5 Optimize and scale wireless network configuration

  • Use wireless optimization tools and techniques
  • Optimize RF coverage, User count, and cell size adjustments

4.6 Optimize security on wired/wireless networks and devices

  • Centralize security implementation and administration

4.7 Optimize power utilization by implementing Green IT practices

  • Implement power, cooling, PoE

5. Troubleshoot wireless, switched, and routed network infrastructures for SMB customers

5.1 Troubleshoot routed and switched networks

  • Describe specific tools appropriate for troubleshooting wired or wireless networks, and manage network assets using appropriate tools

5.2 Troubleshoot remote connectivity

  • Troubleshoot VPNs
  • Troubleshoot mobile devices (tablets, phones, and laptops)

5.3 Troubleshoot wireless networks

  • Troubleshoot connectivity and roaming
  • Troubleshoot wireless security
  • Use HP and industry-standard tools to troubleshoot wireless infrastructure

5.4 Troubleshoot security faults and threats

  • Secure the network and mitigate security threats
  • Troubleshoot secure infrastructure for SMB customers

5.5 Troubleshoot common network issues using the HP troubleshooting methodology

  • Establish objectives and translate the reported system issue into the precise problem statement
  • Gather, document, and analyze data
  • Develop and verify a hypothesis
  • Design and implement an action plan
  • Evaluate the results and compare to the objectives
  • Iterate through process as required

6. Perform administrative, operational, and network management tasks for SMB customers

6.1 Perform change management to network configuration and devices

  • Configuration changes—network devices, growth
  • Keep software current—management server updates, TFTP, firmware updates, etc.

6.2 Manage network events and policies

  • Set up alerts, policies, and notifications
  • Review and take action on alerts andlog files
  • Develop response policies such as scripted issue resolution, escalation processes, management involvement, end-user/customer communication, etc.

6.3 Perform network administration tasks

  • Implement moves/adds/changes/deletions/password resets
  • Back up device configurations via management software or device console
  • Keep documentation current—network diagrams, passwords, device configurations, etc.

Exam Track

We’ll prepare you for, and test you in, the following exam:

  • Exam HP4-A02 - HP Accredited Technical Associate (ATA) – Networks

What's Included

Included:

  • HP official course material including practice exam.

Prerequisites

To ensure that you pass your exam and become an HP Accredited Technical Associate you should have a CompTIA A+ or a Microsoft MTA Certification and between 18-24 months experience with HP kit.

Weet je niet zeker of je aan de vereisten voldoet? Maak je geen zorgen. Jouw trainingsadviseur bespreekt jouw achtergrond met je om te begrijpen of deze cursus geschikt is voor je.

Beoordelingen

Wereldwijd heeft Firebrand in haar 10-jarig bestaan al 105153 studenten opgeleid! We hebben ze allemaal gevraagd onze versnelde opleidingen te evalueren. De laatste keer dat we onze resultaten analyseerden, bleek 96.66% ons te beoordelen als 'boven verwachting'


"Quick dive in AWS ! Loved it!"
Daniel Penninck, smals. (26/10/2020 (Maandag) t/m 29/10/2020 (Donderdag))

"I can say that I definitely improved and expanded my AWS knowledge with this course. Loved the discussions and the depth, as well as the focus on achieving the Associate Certification by taking a look at real exam questions."
A.S. (26/10/2020 (Maandag) t/m 29/10/2020 (Donderdag))

"Really focused on the exam, with many examples and labs to dive deep on the content. With Instructor, this amount of services and offerings from AWS are much more likely easy to understand and distinguish."
A.R. (26/10/2020 (Maandag) t/m 29/10/2020 (Donderdag))

"The instructor was very knowledgeable and very friendly. He explains things really well!"
Abdul Hasnath, Dynatrace. (26/10/2020 (Maandag) t/m 29/10/2020 (Donderdag))

"With the training I got the necessary basis and direction and on how to approach the preparation for the CISA exam. I recommend to CISA candidates to first follow a training by Firebrand."
Anoniem, Rodriguez AertsFinancial Consultancy (11/5/2020 (Maandag) t/m 14/5/2020 (Donderdag))

Cursusdata

Start datum

Eind datum

Status

Locatie

Nu boeken

24/5/2021 (Maandag)

27/5/2021 (Donderdag)

Beëindigde cursus - Geef feedback

-

 

27/9/2021 (Maandag)

30/9/2021 (Donderdag)

Wachtlijst

Landelijk

 

8/11/2021 (Maandag)

11/11/2021 (Donderdag)

Beperkte beschikbaarheid

Landelijk

 

20/12/2021 (Maandag)

23/12/2021 (Donderdag)

Open

Landelijk

 

31/1/2022 (Maandag)

3/2/2022 (Donderdag)

Open

Landelijk

 

14/3/2022 (Maandag)

17/3/2022 (Donderdag)

Open

Landelijk

 

Nieuwste beoordelingen van onze studenten