Bespaar met de aankoop van twee trainingen tot 31 juli 2021, 50% op de prijs van de tweede training. Bekijk hier de algemene voorwaarden!

CompTIA - Convergence Technologies Professional (CTP+)

Looptijd

Looptijd:

Slechts 3 dagen

Methode

Methode:

Klas / Online / Hybride

Volgende datum

Volgende datum:

27/9/2021 (Maandag)

Overview

CompTIA Convergence Technologies Professional (CTP+) certification proves that you have high-level knowledge and skills to sell and service components of data, voice and multimedia convergence technologies.

On the three-day accelerated CompTIA CTP+ course, you'll learn about:

  • Data and Internet protocol (IP) networking
  • Voice and telephone services
  • Convergence networking

Zeven redenen waarom u met uw CTP+ cursus voor Firebrand Training moet kiezen

  1. U zult in slechts 3 dagen CTP+ gecertificeerd zijn. Met ons bent u in recordtijd CTP+ getraind
  2. Onze CTP+ cursus is all-inclusive. Een eenmalige contributie bekostigt alle cursusmaterialen, accommodaties en maaltijden.
  3. Slaag de eerste keer voor CTP+ of volg de training nogmaals. Dit is onze garantie. Wij zijn er zeker van dat u de eerste keer zult slagen voor uw CTP+ cursus. Mocht dit niet het geval zijn, dan kunt u binnen het jaar terugkomen en enkel voor de accommodatie en examens te betalen. De rest is gratis
  4. U zult meer CTP+ leren. Een dag met een traditionele training aanbieder duurt over het algemeen van 9 uur 's ochtends tot 17 uur in de middag, met een lange lunchpauze. Met Firebrand Training kunt u rekenen op minstens 12 uur leren per dag met uw instructeur
  5. U zult CTP+ snellerde theorie beheersen. De kans bestaat dat u een andere manier van leren heeft dan uw omgeving. Wij combineren visuele, auditieve en tastbare leerstijlen, dit zorgt voor een snellere en eenvoudigere manier van leren
  6. U zult CTP+ studeren met de beste. We hebben het Q-For kwaliteit label, dat onze standaarden en professionaliteit in de training markt erkent. Naast het winnen van nog vele andere prijzen, hebben we inmiddels 104996 professionals getraind en gecertificeerd en we zijn partners met alle grote namen in deze tak van het bedrijfsleven
  7. U zult meer doen dan alleen CTP+ de cursusstof bestuderen. We maken gebruik van laboratoria, case-studies en oefentests, om ervoor te zorgen dat u uw nieuwe kennis in uw werkomgeving kan toepassen. Onze instructeurs gebruiken demonstraties en hun eigen ervaringen om de dag interessant en boeiend te houden

Benefits

Curriculum

You'll learn the following, to ensure you pass the CTP+exam at the end of the course:

Data Networking Domain

Industry Standards and Protocols Objectives

  • Layers of the OSI reference model
  • Functions of each layer of the OSI reference model
  • Protocols and Services of each OSI layer
  • Data encapsulation (including but not limited to: data, segment, packet, frame) in relation to frame assembly

LAN/WAN Infrastructure Objectives

  • LAN topologies (including but not limited to: ring, bus, star)
  • WAN topologies (including but not limited to: full mesh, partial mesh, point-to-point)
  • Routers, switches and hubs in relation to data networking hardware
  • Modem and CSU/DSU in relation to data networking hardware
  • Standards, protocols and their characteristics (including but not limited to: 802.2, 802.3, 802.5, PPP, frame relay, ATM, SONET/SDH)
  • Spanning Tree Protocol (STP)
  • DTE and DCE
  • Cabling (including but not limited to: CAT3, CAT5, shielded twisted pair [STP], V.35, thinnet, RG58, fiber optic [single-mode, multi-mode])
  • Cable terminators
  • VLANs
  • MAC address

IP Protocols Objectives

  • IPv4 and IPv6 addresses
  • Network classes (A, B, C, D)
  • Network, host and broadcast addresses
  • Private network numbers
  • Subnet masking
  • Host addresses in a subnet
  • Host address and subnet mask
  • Subnet mask by both the bit count and dotted decimal notation
  • Routed and routing protocols
  • Dynamic, static and default routes
  • DNS features and functions
  • DHCP features and functions
  • NAT features and functions
  • Connection-oriented and connectionless transport in relation to TCP/UDP
  • Well-known, registered and random/dynamic ports in relation to TCP/UDP
  • Common ports (including but not limited to: Telnet, HTTP, FTP, TFTP, SMTP, POP3, SNMP, DNS) in relation to TCP/UDP

Troubleshooting Objectives

  • ICMP (tracert, ping and error messages) in relation to troubleshooting tools
  • Other available troubleshooting tools for cabling, hardware, and configuration of devices (software and hardware)
  • Straight-through vs. crossover cable
  • Common configuration errors in IP devices

Telephony Networking Domain

Industry Standards and Protocols Objectives

  • Standard reference nomenclature (including but not limited to: X.nnn, Q.nnn, I.nnn, E.nnn)

Basic Telephony Concepts Objectives

  • Call-processing steps (call setup, call connection, call completion)
  • Analog trunks and station lines
  • Electrical characteristics of ground-start and loop-start analog trunks (not including local voltage specifications)
  • Various types of E&M trunks (2W/4W audio) in relation to analog trunks
  • DSH technologies (including but not limited to: DS0, DS1, DS3, OC3, OC12, OC48, OC192)
  • Analog ringing (electrical specs) vs. digital alerting (A&B bits) in relation to signaling types
  • Analog transmission impairments involved in a phone call (including but not limited to: loss, echo, noise, cross-talk, delay)
  • Echo cancellation in 2-wire to 4-wire hybrids
  • Pulse code modulation in telephony
  • A-Law and Mu-Law in relation to digitising voice
  • Functions of class 4 (tandem) and class 5 (end-office) switches in relation to PSTN/GSTN
  • Various numbering plans (including but not limited to: global, NANP, private)
  • Digital Signal Hierarchy (DSH) terminology (STRATUM)
  • FXO and FXS interfaces

Infrastructure Objectives

  • Safety procedures (including but not limited to: cabling, power, grounding, ESD, NEBS)
  • Proper cabling procedures in specific environments (PVC vs. plenum)
  • Troubleshooting tools (including but not limited to: 4-pair tester, inductor/buzzer/toner, linesman test set (butt set), volt meter, laptop)
  • Symptoms of improper clocking configuration
  • Various cable terminations (including but not limited to: USOC/RJ-nn standards, ITU/V.nnn standards)

Signaling Objectives

  • Signaling of ground-start and loop-start analog trunks (not including line voltages)
  • In-band vs. out-of-band in relation to signaling types
  • Signaling functions of ISDN (e.g., ISDN BRI, ISDN PRI, ISDN 23 and ISDN 30) and SS7/C7
  • E&M, ground start, loop start and OPX in relation to signaling types (A, B, C and D bits)
  • Analog dialing (DTMF) vs. digital addressing (set-up messages) in relation to signaling types

Convergence Technologies Domain

Industry Standards and Protocols Objectives

  • Major industry standards (including but not limited to: 802.x, RFCxxxx, E.nnn, G.nnn, H.nnn, Q.nnn, X.nnn) relevant to convergence
  • Major standards bodies (including but not limited to: IEEE, ITU, IETF, EIA, TIA, ANSI, Bell) relevant to convergence

Voice-over Convergence Objectives

  • Latency, jitter and wander, and their impact on real-time communications
  • Importance of a jitter buffer
  • Impact of large data frames on real-time communications
  • Quality of Service (QoS) in converged networks
  • Quality of Service (QoS) technologies (including but not limited to: RSVP, DiffServ, IntServ, 802.1P/Q) for converged networks
  • Common codecs (G.7xx) and their bandwidth requirements in a converged environment
  • Compressing voice
  • T1, E1 and J1 for data and voice
  • Bandwidth of packetized voice
  • Transporting modem and fax through a converged solution

Topology Convergence Objectives

  • Signalling protocols for converged networks (including but not limited to: H.245, H.320, H.323, H.450, SIP, MGCP, NCS)
  • Function of a gatekeeper
  • Call flows between convergent-based and circuit-based calls
  • Function of gateways
  • Characteristics of circuit-switched and packet-switched technologies

Exam Track

You'll sit the following exam:

  • CN0-201 exam - CompTIA Convergence Technologies Professional (CTP+)

What's Included

Prerequisites

It is recommended that you are CompTIA Network+ certified or equivalent, plus have 18-24 months of experience in data networking, telephony and other convergence-related technologies.

Weet je niet zeker of je aan de vereisten voldoet? Maak je geen zorgen. Jouw trainingsadviseur bespreekt jouw achtergrond met je om te begrijpen of deze cursus geschikt is voor je.

Beoordelingen

Wereldwijd heeft Firebrand in haar 10-jarig bestaan al 104996 studenten opgeleid! We hebben ze allemaal gevraagd onze versnelde opleidingen te evalueren. De laatste keer dat we onze resultaten analyseerden, bleek 96.66% ons te beoordelen als 'boven verwachting'


"I really enjoyed the Firebrand training, learnt a lot and enjoyed my time."
Sienna Kumar, Computacenter. (28/6/2021 (Maandag) t/m 30/6/2021 (Woensdag))

"It was good, I learnt a lot."
Anonymous. (28/6/2021 (Maandag) t/m 30/6/2021 (Woensdag))

"This course has been fun and interesting, the format has kept it as engaging as it can be."
Rebecca Quarterman, Computacenter. (28/6/2021 (Maandag) t/m 30/6/2021 (Woensdag))

"Really helpful and thoroughly explained content."
Thomas Brook, Computacenter. (28/6/2021 (Maandag) t/m 30/6/2021 (Woensdag))

"Engaging, yet challenging course which bolstered my technical knowledge."
Anonymous. (23/6/2021 (Woensdag) t/m 25/6/2021 (Vrijdag))

Cursusdata

Start datum

Eind datum

Status

Locatie

Nu boeken

24/5/2021 (Maandag)

26/5/2021 (Woensdag)

Beƫindigde cursus - Geef feedback

-

 

27/9/2021 (Maandag)

29/9/2021 (Woensdag)

Wachtlijst

Landelijk

 

8/11/2021 (Maandag)

10/11/2021 (Woensdag)

Beperkte beschikbaarheid

Landelijk

 

20/12/2021 (Maandag)

22/12/2021 (Woensdag)

Open

Landelijk

 

31/1/2022 (Maandag)

2/2/2022 (Woensdag)

Open

Landelijk

 

14/3/2022 (Maandag)

16/3/2022 (Woensdag)

Open

Landelijk

 

Nieuwste beoordelingen van onze studenten